https://wikido.isoftdata.com//api.php?action=feedcontributions&user=Spatras&feedformat=atomISoft Wiki - User contributions [en]2024-03-29T06:59:47ZUser contributionsMediaWiki 1.37.2https://wikido.isoftdata.com//index.php?title=ITrack/Quickbooks/Ignore&diff=7971ITrack/Quickbooks/Ignore2014-11-10T20:20:52Z<p>Spatras: /* Solution */</p>
<hr />
<div>The accounting information inside of ITrack should be mirrored in Quickbooks. Therefore, it is usually a bad idea to mark something with "Ignore" inside of ITrack because this will cause discrepancies between the two sets of data.<br />
<br />
== Cause ==<br />
In the Quickbooks screen you/someone marked something as "Ignore."<br />
<br />
== Solution ==<br />
Unignoring an item can cause bad data if done incorrectly, therefore it is recommended that you pay close attention to each step. (<br />
#Open the tab containing the ignored items in ITrack<br />
#Tell the page to show ignored items by selecting the "Ignored" option on the left hand side of the page<br />
#Discover whether the ignored items are already in quickbooks and need to be sync'd or are not in quickbooks and need to be exported<br />
*Single Item Sync<br />
**Double click an item to open the quick sync dialog<br />
**Select the matching item from the list<br />
*Or Multi-Item Sync<br />
**Select only the items you wish to try to sync<br />
**Press sync button to have ITrack automatically sync items with existing 1 to 1 matches<br />
*Export Items<br />
**Select only the items you wish to try to export<br />
**Double check that these items don't already exist in Quickbooks<br />
**Press the export button to send the items to quickbooks<br />
{{Tip|It is strongly recommended that you unselect all items and then go back through and select only items that need to be exported to prevent multiple copies of the same item in quickbooks}}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=ITrack/Quickbooks/Ignore&diff=7970ITrack/Quickbooks/Ignore2014-11-10T20:19:45Z<p>Spatras: </p>
<hr />
<div>The accounting information inside of ITrack should be mirrored in Quickbooks. Therefore, it is usually a bad idea to mark something with "Ignore" inside of ITrack because this will cause discrepancies between the two sets of data.<br />
<br />
== Cause ==<br />
In the Quickbooks screen you/someone marked something as "Ignore."<br />
<br />
== Solution ==<br />
Unignoring an item can cause bad data if done incorrectly, therefore it is recommended that you pay close attention to each step. (<br />
#Open the tab containing the ignored items in ITrack<br />
#Tell the page to show ignored items by selecting the "Ignored" option on the left hand side of the page<br />
#Discover whether the ignored items are already in quickbooks and need to be sync'd or are not in quickbooks and need to be exported<br />
*Single Item Sync<br />
**Double click an item to open the quick sync dialog<br />
**Select the matching item from the list<br />
*Or Multi-Item Sync<br />
**Select only the items you wish to try to sync<br />
**Press sync button to have ITrack automatically sync items with existing 1 to 1 matches<br />
*Export Items<br />
**Select only the items you wish to try to export<br />
**Double check that these items don't already exist in Quickbooks<br />
**Press the export button to send the items to quickbooks<br />
{{Warning|It is strongly recommended that you unselect all items and then go back through and select only items that need to be exported to prevent multiple copies of the same item in quickbooks}}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=7955Ebay templates2014-10-30T20:34:50Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Templates==<br />
Templates are used to fill in the various part specific fields in an EBay listing. These templates are part type specific (ex. one template for engines another for transmissions) but if a part type doesn't have a template assigned to it, the default template will be used instead. The template's description field supports html. Tags are supported in the title, subtitle, and description fields. <br />
===Creating a Description===<br />
To create a template description simply get one of your normal description fields and replace appropriate values with tags. The tags will be replaced with part specific data when you add it to the listings page.<br />
===Shipping in Templates===<br />
Shipping is only taken from a template if that template is specific to that part. The Default template's shipping options are never used.<br />
===Images in Templates===<br />
Images that we put into the template itself are different than the pictures we send to EBay for the cover photo.<br />
To put a parts picture into a template use the link "http://www.cyclerecyclers.net/image.php?productcode={?ProductCode}&inventoryid={?PartNum}&imageid=X" (where x is the number which just represents the numeric ordinal of the image (if excluded 1 is assumed))<br />
*NOTE: if there are more image tags than there are images they will show up as a 1x1 pixel image<br />
**NOTE: The image URL must be enclosed by HTML image tags( <img></img> ) or it will just appear as a link.<br />
<br />
==Tags==<br />
===General Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?Make} || The part's make<br />
|-<br />
| {?Model} || The part's model<br />
|-<br />
| {?Year} || The part's year<br />
|-<br />
| {?Description} || The part's description<br />
|-<br />
| {?Price} || The part's price<br />
|-<br />
| {?Manufacturer} || The part's assembly manufacturer<br />
|-<br />
| {?AssemblyModel} || The part's assembly model<br />
|-<br />
| {?PartType} || The part's type<br />
|-<br />
| {?Category} || The part's eBay category<br />
|-<br />
| {?Store} || The part's store<br />
|-<br />
| {?ProductCode} || The a stores product code<br />
|-<br />
| {?TagNumber} || The part's tag number<br />
|-<br />
| {?Condition} || The part's Condition<br />
|-<br />
| {?FlexLabelX} || The part's flex label (X should be replaced by a number between 1 and 4)<br />
|-<br />
| {?FlexValueX} || The part's flex value (X should be replaced by a number between 1 and 4}<br />
|}<br />
<br />
===ITrack Pro Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?PartNum} || The part's specific part number<br />
|}<br />
===ITrack Enterprise Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?InventoryID} || The part's inventory id<br />
|-<br />
| {?PartNumber}|| The part's Vendor Part Number<br />
|}<br />
<br />
[[Category:Integrations]]</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7650Ebay Extension2014-06-04T19:37:45Z<p>Spatras: </p>
<hr />
<div>The EBay extension is a paid for addition to ITrack that allows you to list inventory on EBay more efficiently.<br />
<br />
==Setting up the EBay Extension==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. Hitting the ebay sync button will start an ebay authentication process in your web browser. Agreeing and completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings to that account. The account can be changed at any time, but changing it will not clear the auctions that ITrack has already stored, it will only change which account it pulls and sends auctions to and from after the change.<br />
<br />
===Image Hosts===<br />
Selecting an image host will tell ITrack where to get the pictures for your listing from. EBay only allows one externally hosted picture to be associated with each listing as the listing's cover photo. You can put as many images as needed in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported image hosts. The EBay image host option is used with other listing software, such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate listings with information that is unique to a specific part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. It is recommended that all regularly listed items have a template. For more information see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].<br />
<br />
==Listing an Item==<br />
===Finding an Item===<br />
To list an item on ebay we must first send it to the Parts listing screen. This can be done either by selecting the part(s) on the search screen and clicking the send to ebay button or by clicking the add button from the Parts listing tab and then double clicking on a part on the search screen.<br />
<br />
===Sending an Item to EBay===<br />
Once the parts are selected and sent to the Parts listing screen all the applicable default fields and template fields will be filled out and populated. While on the Parts listing tab any individual listing can be edited and customized. Once your listings are ready you can hit the Export button and select and export method. We recommend exporting to EBay. Other export options can't receive all the listing information that is selected and filled out in ITrack.<br />
<br />
==After Listing==<br />
===Viewing Auctions in ITrack===<br />
If you hooked up your ebay account to ITrack after listing an item you can hit the update button or reopen the extension to populate the auctions list with all the auctions associated with that account. ITrack will tell you the status of the auction, the number of bids, the name of the high bidder (if there is one), price, reserve price, quantity listed, quantity sold, how much time is left until the auction expires, and the time the auction was listed.<br />
===Managing Closed Auctions===<br />
If an auction's status is closed that means an EBay user has bought the part. When this happens there will be a transaction that will be pulled in from ebay and tied to that auction (if more than one quantity was sold there will be multiple transactions). Transactions will contain the date when the winning purchase was made, the price, how many items were bought, the total charge, the status of the payment, the buyer's ebay id, email, and shipping address.<br />
<br />
Once an auction has a transaction you can send it to an invoice (even with an incomplete status). If the transaction isn't associated with a customer currently in the database then the customer will be the Default EBay customer.<br />
<br />
==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a few of these fields can be exported to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" <br />
*"Dispatch Time"</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7647Ebay Extension2014-06-04T16:35:46Z<p>Spatras: /* Listing an Item on EBay */</p>
<hr />
<div>The EBay extension is a paid for addition to ITrack that allows you to list inventory on EBay more efficiently.<br />
==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a few of these fields can be exported to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" <br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Extension==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. Hitting the ebay sync button will start an ebay authentication process in your web browser. Agreeing and completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings to that account. The account can be changed at any time, but changing it will not clear the auctions that ITrack has already stored, it will only change which account it pulls and sends auctions to and from after the change.<br />
<br />
===Image Hosts===<br />
Selecting an image host will tell ITrack where to pull your pictures from. EBay only allows one externally hosted picture to be associated with each listing as it's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate information that could be unique to a specific type of part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. There is a default template that populate an item's fields (except the Shipping) if there is no specific template for that part. It is recommended that all regularly listed items have a template. For more information see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].<br />
<br />
==Listing an Item==<br />
===Finding an Item===<br />
To list an item on ebay we must first send it to the ebay screen. This can be done either by selecting the part(s) on the search screen and clicking the send to ebay button or by clicking the add button from the Parts listing tab and then double clicking on a part on the search screen.<br />
===Sending an Item to EBay===<br />
Once the parts are selected and sent to the ebay screen all the aplicable default fields and template fields will be filled out and populated with their respective values. While on the Parts listing tab a listing can be edited individually from the other listings. Once the listings contain all the correct values you can hit the export button and select any of the options. We recommend exporting to ebay since our other export options can't receive all the listing information.<br />
<br />
==After Listing==<br />
===Viewing Auctions in ITrack===<br />
If you hooked up your ebay account to ITrack after listing an item you can hit the update button or reopen the extension to populate the auctions list with all the auctions associated with that account. ITrack will tell you the status of the auction, the number of bids, the name of the high bidder if there is one, price, reserve, quantity listed, quantity sold, how much time is left until the auction expires, and the time the auction was listed.<br />
===Managing Closed Auctions===<br />
If an auction is listed as closed that means an EBay user has won the auction or bought it at the buy it now price. When this happens there will be a transaction that will be pulled in from ebay and tied to that auction (if more than one quantity was sold there will be multiple transactions). Transactions will contain the date when the winning purchase was made, the price, how many items were bought, the total charge, the status of the payment, the buyer's ebay id, email, and shipping address.<br />
<br />
Once an auction has a transaction you can send it to an invoice. If the transaction isn't associated with a customer currently in the database then the invoice will be attached to the Default EBay customer which can be assigned on the EBay Config screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7646Ebay Extension2014-06-03T21:34:44Z<p>Spatras: </p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a few of these fields can be exported to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" <br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Extension==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. Hitting the ebay sync button will start an ebay authentication process in your web browser. Agreeing and completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings to that account. The account can be changed at any time, but changing it will not clear the auctions that ITrack has already stored, it will only change which account it pulls and sends auctions to and from after the change.<br />
<br />
===Image Hosts===<br />
Selecting an image host will tell ITrack where to pull your pictures from. EBay only allows one externally hosted picture to be associated with each listing as it's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate information that could be unique to a specific type of part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. There is a default template that populate an item's fields (except the Shipping) if there is no specific template for that part. It is recommended that all regularly listed items have a template. For more information see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].<br />
<br />
==Listing an Item==<br />
===Finding an Item===<br />
To list an item on ebay we must first send it to the ebay screen. This can be done either by selecting the part(s) on the search screen and clicking the send to ebay button or by clicking the add button from the Parts listing tab and then double clicking on a part on the search screen.<br />
===Sending an Item to EBay===<br />
Once the parts are selected and sent to the ebay screen all the aplicable default fields and template fields will be filled out and populated with their respective values. While on the Parts listing tab a listing can be edited individually from the other listings. Once the listings contain all the correct values you can hit the export button and select any of the options. We recommend exporting to ebay since our other export options can't receive all the listing information.<br />
<br />
==After Listing==<br />
===Viewing Auctions in ITrack===<br />
If you hooked up your ebay account to ITrack after listing an item you can hit the update button or reopen the extension to populate the auctions list with all the auctions associated with that account. ITrack will tell you the status of the auction, the number of bids, the name of the high bidder if there is one, price, reserve, quantity listed, quantity sold, how much time is left until the auction expires, and the time the auction was listed.<br />
===Managing Closed Auctions===<br />
If an auction is listed as closed that means an EBay user has won the auction or bought it at the buy it now price. When this happens there will be a transaction that will be pulled in from ebay and tied to that auction (if more than one quantity was sold there will be multiple transactions). Transactions will contain the date when the winning purchase was made, the price, how many items were bought, the total charge, the status of the payment, the buyer's ebay id, email, and shipping address.<br />
<br />
Once an auction has a transaction you can send it to an invoice. If the transaction isn't associated with a customer currently in the database then the invoice will be attached to the Default EBay customer which can be assigned on the EBay Config screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7645Ebay Extension2014-06-03T20:59:30Z<p>Spatras: /* Required Fields */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a few of these fields can be exported to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" <br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate information that could be unique to a specific type of part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. There is a default template that populate an item's fields (except the Shipping) if there is no specific template for that part. It is recommended that all regularly listed items have a template. For more information see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].<br />
<br />
==Listing an Item==<br />
===Finding an Item===<br />
To list an item on ebay we must first send it to the ebay screen. This can be done either by selecting the part(s) on the search screen and clicking the send to ebay button or by clicking the add button from the Parts listing tab and then double clicking on a part on the search screen.<br />
===Sending an Item to EBay===<br />
Once the parts are selected and sent to the ebay screen all the aplicable default fields and template fields will be filled out and populated with their respective values. While on the Parts listing tab a listing can be edited individually from the other listings. Once the listings contain all the correct values you can hit the export button and select any of the options. We recommend exporting to ebay since our other export options can't receive all the listing information.<br />
<br />
==After Listing==<br />
===Viewing Auctions in ITrack===<br />
If you hooked up your ebay account to ITrack after listing an item you can hit the update button or reopen the extension to populate the auctions list with all the auctions associated with that account. ITrack will tell you the status of the auction, the number of bids, the name of the high bidder if there is one, price, reserve, quantity listed, quantity sold, how much time is left until the auction expires, and the time the auction was listed.<br />
===Managing Closed Auctions===<br />
If an auction is listed as closed that means an EBay user has won the auction or bought it at the buy it now price. When this happens there will be a transaction that will be pulled in from ebay and tied to that auction (if more than one quantity was sold there will be multiple transactions). Transactions will contain the date when the winning purchase was made, the price, how many items were bought, the total charge, the status of the payment, the buyer's ebay id, email, and shipping address.<br />
<br />
Once an auction has a transaction you can send it to an invoice. If the transaction isn't associated with a customer currently in the database then the invoice will be attached to the Default EBay customer which can be assigned on the EBay Config screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7644Ebay Extension2014-06-03T19:58:40Z<p>Spatras: /* EBay Templates */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate information that could be unique to a specific type of part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. There is a default template that populate an item's fields (except the Shipping) if there is no specific template for that part. It is recommended that all regularly listed items have a template. For more information see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].<br />
<br />
==Listing an Item==<br />
===Finding an Item===<br />
To list an item on ebay we must first send it to the ebay screen. This can be done either by selecting the part(s) on the search screen and clicking the send to ebay button or by clicking the add button from the Parts listing tab and then double clicking on a part on the search screen.<br />
===Sending an Item to EBay===<br />
Once the parts are selected and sent to the ebay screen all the aplicable default fields and template fields will be filled out and populated with their respective values. While on the Parts listing tab a listing can be edited individually from the other listings. Once the listings contain all the correct values you can hit the export button and select any of the options. We recommend exporting to ebay since our other export options can't receive all the listing information.<br />
<br />
==After Listing==<br />
===Viewing Auctions in ITrack===<br />
If you hooked up your ebay account to ITrack after listing an item you can hit the update button or reopen the extension to populate the auctions list with all the auctions associated with that account. ITrack will tell you the status of the auction, the number of bids, the name of the high bidder if there is one, price, reserve, quantity listed, quantity sold, how much time is left until the auction expires, and the time the auction was listed.<br />
===Managing Closed Auctions===<br />
If an auction is listed as closed that means an EBay user has won the auction or bought it at the buy it now price. When this happens there will be a transaction that will be pulled in from ebay and tied to that auction (if more than one quantity was sold there will be multiple transactions). Transactions will contain the date when the winning purchase was made, the price, how many items were bought, the total charge, the status of the payment, the buyer's ebay id, email, and shipping address.<br />
<br />
Once an auction has a transaction you can send it to an invoice. If the transaction isn't associated with a customer currently in the database then the invoice will be attached to the Default EBay customer which can be assigned on the EBay Config screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=7643Ebay templates2014-06-03T19:03:38Z<p>Spatras: /* Templates */</p>
<hr />
<div>==Templates==<br />
Templates are used to fill in the various part specific fields in an EBay listing. These templates are part type specific (ex. one template for engines another for transmissions) but if a part type doesn't have a template assigned to it, the default template will be used instead. The template's description field supports html. Tags are supported in the title, subtitle, and description fields. <br />
===Creating a Description===<br />
To create a template description simply get one of your normal description fields and replace appropriate values with tags. The tags will be replaced with part specific data when you add it to the listings page.<br />
===Shipping in Templates===<br />
Shipping is only taken from a template if that template is specific to that part. The Default template's shipping options are never used.<br />
===Images in Templates===<br />
Images that we put into the template itself are different than the pictures we send to EBay for the cover photo.<br />
To put a parts picture into a template use the link "http://www.cyclerecyclers.net/image.php?productcode={?ProductCode}&inventoryid={?PartNum}&imageid=X" (where x is the number which just represents the numeric ordinal of the image (if excluded 1 is assumed))<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
**NOTE: The image URL must be enclosed by HTML image tags( <img></img> ) or it will just appear as a link.<br />
<br />
==Tags==<br />
===General Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?Make} || The part's make<br />
|-<br />
| {?Model} || The part's model<br />
|-<br />
| {?Year} || The part's year<br />
|-<br />
| {?Description} || The part's description<br />
|-<br />
| {?Price} || The part's price<br />
|-<br />
| {?Manufacturer} || The part's assembly manufacturer<br />
|-<br />
| {?AssemblyModel} || The part's assembly model<br />
|-<br />
| {?PartType} || The part's type<br />
|-<br />
| {?Category} || The part's eBay category<br />
|-<br />
| {?Store} || The part's store<br />
|-<br />
| {?ProductCode} || The a stores product code<br />
|-<br />
| {?TagNumber} || The part's tag number<br />
|-<br />
| {?Condition} || The part's Condition<br />
|-<br />
| {?FlexLabelX} || The part's flex label (X should be replaced by a number between 1 and 4)<br />
|-<br />
| {?FlexValueX} || The part's flex value (X should be replaced by a number between 1 and 4}<br />
|}<br />
<br />
===ITrack Pro Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?PartNum} || The part's specific part number<br />
|}<br />
===ITrack Enterprise Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?InventoryID} || The part's inventory id<br />
|-<br />
| {?PartNumber}|| The part's Vendor Part Number<br />
|}<br />
<br />
[[Category:Integrations]]</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7642Ebay Extension2014-06-03T18:35:23Z<p>Spatras: /* EBay Templates */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate information that could be unique to a specific type of part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. There is a default template that populate an item's fields (except the Shipping) if there is no specific template for that part. It is recommended that all regularly listed items have a template. For more information see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7641Ebay Extension2014-06-03T18:35:09Z<p>Spatras: /* EBay Templates */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==<br />
Templates are used to automatically populate information that could be unique to a specific type of part. Templates are where you will set the default title, description, Return Policy, and Shipping Options. There is a default template that populate an item's fields (except the Shipping) if there is no specific template for that part. It is recommended that all regularly listed items have a template. For more info see [http://wikido.isoftdata.com/index.php?title=Ebay_templates| EBay Templates].</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7637Ebay Extension2014-06-02T21:14:47Z<p>Spatras: /* Image Hosts */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7636Ebay Extension2014-06-02T21:14:28Z<p>Spatras: /* Setting up the EBay Configuration Screen */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [[http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates| Templates]] for more info). When using direct to EBay only our own websites are currently supported hosts but the EBay option can be used when using other listing software such as TurboLister.<br />
<br />
===Default Listing Options===<br />
In this section you can set the defaults you want for most of the listings that will be exported from ITrack. The Listing duration and Condition that are selected should be the one that will apply to most of your listings. The Payment Method list here should reflect what your company will accept and support as payments through EBay (Reminder: one electronic payment method is required to list on ebay). If you chose PayPal as an accepted payment method then the PayPal Email edit should be filled out with a valid email associated with a valid PayPal account. We do not verify or validate PayPal account information.<br />
<br />
==EBay Templates==</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7635Ebay Extension2014-06-02T20:41:53Z<p>Spatras: /* Listing an Item on EBay */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"<br />
<br />
==Setting up the EBay Configuration Screen==<br />
===EBay Account===<br />
This is used to hook up an EBay account to ITrack. By hitting the ebay sync button will start an ebay authentication process in a web browser. Completing the authentication process will give ITrack permissions to view your ebay account's past listings as well as post new listings onto that account. This can be changed at any time, but it will not clear the auctions that ITrack has already marked as significant and stored, it will only change which account it pulls and sends auctions to and from.<br />
<br />
===Image Hosts===<br />
Selecting one of these will tell ITrack where to pull your pictures from. Unfortunately EBay only allows one externally hosted picture to be associated with each item so that picture will be assigned as the listing's cover photo. You can still put as many externally hosted images in the description of a listing (see [[http://wikido.isoftdata.com/index.php?title=Ebay_templates#Images_in_Templates|EBay Templates]] for more info). When using direct to EBay only our own websites are currently supported but the EBay option can be used when using other listing software such as TurboLister.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7633Ebay Extension2014-05-30T23:39:50Z<p>Spatras: /* =Required Fields */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields===<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7632Ebay Extension2014-05-30T23:38:55Z<p>Spatras: /* =Required Fields */</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields==<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
*"Listing Duration"<br />
*"Condition"<br />
*One Electronic Payment Method (PayPal recommended)<br />
*If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
*"Title"<br />
*"Description"<br />
*"Refund Option"<br />
*If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
*A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
*One valid "Shipping Service" is required<br />
*"Dispatch Time"</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=7631Ebay templates2014-05-30T23:38:11Z<p>Spatras: /* Templates */</p>
<hr />
<div>==Templates==<br />
Templates are used to fill in the various fields in an EBay listing. These templates are part type specific (ex. one template for engines another for transmissions) but if a part type doesn't have a template assigned to it, the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags. The tags will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://www.cyclerecyclers.net/image.php?productcode={?ProductCode}&inventoryid={?PartNum}&imageid=X" (where x is the number which just represents the numeric ordinal of the image (if excluded 1 is assumed))<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
**NOTE: The image URL must be enclosed by HTML image tags. <img></img><br />
<br />
==Tags==<br />
===General Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?Make} || The part's make<br />
|-<br />
| {?Model} || The part's model<br />
|-<br />
| {?Year} || The part's year<br />
|-<br />
| {?Description} || The part's description<br />
|-<br />
| {?Price} || The part's price<br />
|-<br />
| {?Manufacturer} || The part's assembly manufacturer<br />
|-<br />
| {?AssemblyModel} || The part's assembly model<br />
|-<br />
| {?PartType} || The part's type<br />
|-<br />
| {?Category} || The part's eBay category<br />
|-<br />
| {?Store} || The part's store<br />
|-<br />
| {?ProductCode} || The a stores product code<br />
|-<br />
| {?TagNumber} || The part's tag number<br />
|-<br />
| {?Condition} || The part's Condition<br />
|-<br />
| {?FlexLabelX} || The part's flex label (X should be replaced by a number between 1 and 4)<br />
|-<br />
| {?FlexValueX} || The part's flex value (X should be replaced by a number between 1 and 4}<br />
|}<br />
<br />
===ITrack Pro Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?PartNum} || The part's specific part number<br />
|}<br />
===ITrack Enterprise Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?InventoryID} || The part's inventory id<br />
|-<br />
| {?PartNumber}|| The part's Vendor Part Number<br />
|}<br />
<br />
[[Category:Integrations]]</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_Extension&diff=7630Ebay Extension2014-05-30T23:37:13Z<p>Spatras: Created page with "==Listing an Item on EBay== ===Required Fields== To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of the..."</p>
<hr />
<div>==Listing an Item on EBay==<br />
===Required Fields==<br />
To list an item on ebay it the following fields are required no matter what listing service is used. Only a limited number of these required fields can be transferred to other listing software.<br />
<br />
-"Listing Duration"<br />
-"Condition"<br />
-One Electronic Payment Method (PayPal recommended)<br />
-If PayPal is an accepted Payment Method then a "PayPal email" is also required<br />
-"Title"<br />
-"Description"<br />
-"Refund Option"<br />
-If Returns are accepted then "Returns Within" and "Shipping Paid By" are required<br />
-A "Starting Price" or "Buy It Now" price of $1.00 or more<br />
-One valid "Shipping Service" is required<br />
-"Dispatch Time"</div>Spatrashttps://wikido.isoftdata.com//index.php?title=ITrack/Pro/Quickbooks_Screen/Installation&diff=7614ITrack/Pro/Quickbooks Screen/Installation2014-05-14T21:03:24Z<p>Spatras: /* Synching up Tax Types */</p>
<hr />
<div>So you're setting up the Quickbooks Toolkit screen!<br />
<br />
== Installing on the client machine ==<br />
We can not link Quickbooks and ITrack Pro until the customer has Quickbooks all set up (because we don't know - and shouldn't know - the inner workings of the customer's accounting methods). Once Quickbooks is set up according to their accounting methods just follow these steps:<br />
<br />
# Install the latest version of the Quickbooks SDK (currently [http://downloads.isoftdata.com/QBSDK80.exe 8.0])<br />
##Requires a restart.<br />
# Put Quickbooks into multi-user mode (File->Switch to Multi-User mode)<br />
# Make sure the ITrack Quickbooks Toolkit is pointed at the same company file as the one open in Quickbooks<br />
# Initiate communication with Quickbooks from the ITrack Quickbooks Toolkit<br />
# Go back to Quickbooks, set it up to always be able to communicate, even when Quickbooks is not turned on<br />
<br />
== Dependencies ==<br />
You will not be able to push certain objects to Quickbooks until all of the objects that they depend on are successfully linked with Quickbooks.<br />
<br />
Here are the objects that can be exported to Quickbooks, followed by the objects that they depend on:<br />
<br />
=== Invoice ===<br />
* Customer<br />
* Salesman<br />
* Tax item<br />
<br />
=== Check (a negative payment) ===<br />
* Payment method<br />
* Customer<br />
* Account receivable<br />
* Bank<br />
<br />
=== Journal Entry ===<br />
* Debit account<br />
* Credit account<br />
<br />
=== Part Type ===<br />
* Income account<br />
* Expense account<br />
<br />
=== Payment ===<br />
* Payment method<br />
* Customer<br />
* Account receivable<br />
<br />
=== Purchase Order ===<br />
* Vendor<br />
<br />
=== Quote ===<br />
* Customer<br />
* Salesman<br />
* Tax item<br />
<br />
=== Lineitem ===<br />
For invoices, quotes, or purchase orders.<br />
<br />
These are not required, but if ITrack thinks that they exist in Quickbooks, it will attempt to reference them.<br />
<br />
* Part type<br />
* Category<br />
<br />
== Integrating ITrack Pro and QuickBooks ==<br />
* You will need to know where the QuickBooks Company File is stored. Once you have that information, on the QuickBooks Toolkit there is a textbox at the top of the screen; click the "Browse" button and navigate to where the QuickBooks Company File is stored.<br />
* Integrating ITrack Enterprise with QuickBooks is a whole different ballgame...<br />
<br />
[[File:LocationOfCompanyFile.png]]<br />
<br />
* If QuickBooks has already been integrated with ITrack Pro, then it should be relatively simple to start pushing invoices and payments over to QuickBooks. If you are integrating QuickBooks with an ITrack Pro Customer for the first time, it gets a lot more complicated (ESPECIALLY if the customer has already been using QuickBooks for a while before integrating it with ITrack Pro). Here is the general idea of how to integrate QuickBooks with ITrack Pro if the customer has not been using QuickBooks previously to integrating it with ITrack Pro:<br />
<br />
=== Push Customers Over ===<br />
* The goal here is to get the customer list in ITrack Pro to be the same as the customer list in QuickBooks.<br />
* In the QuickBooks Screen of ITrack Pro, go to the Customers Tab. You should see a whole bunch of customers ready to be exported. All of the customers that have the checkbox checked will be exported over to QuickBooks after you hit the 'Export' button.<br />
[[File:ExportCustomers.png]]<br />
* You can check that the customers went into QuickBooks by clicking the "Customers" button at the top toolbar inside of QuickBooks.<br />
<br />
=== Push Vendors Over ===<br />
* As with customers, you want the vendor list in ITrack Pro to match the vendor list in QuickBooks.<br />
* In the QuickBooks Screen, go to the Vendors tab, select the vendors you want to export to QuickBooks (using the checkboxes), and click the "Export" button.<br />
[[File:ExportVendors.png]]<br />
* To verify that the vendors made it over, you can click the "Vendors" button in the top toolbar inside of QuickBooks.<br />
<br />
=== Push Over the Misc. Part Type ===<br />
* For later configuration efforts, you will probably want to push over the Misc. Part type. Go to the Part Types in the QuickBooks screen inside of ITrack Pro.<br />
* Click the "Select None" button.<br />
* Scroll down to the bottom of the page and check the box next to Number 9990 - Miscellaneous Parts; then hit the "Export" button.<br />
<br />
=== Push Over Salespeople and Payment Types ===<br />
* In the "Other" tab of the QuickBooks Toolkit in ITrack Pro, you can export Salespeople and Payment Types.<br />
* For salespeople there will be an entry for each worker that has an "Employee" type and a "Salesman" type. Selecting the checkbox on either the Employee type or Salesman type will select the other checkbox for that same user as well.<br />
* Once you have selected the employees and payment types you want to push to QuickBooks, hit the "Export" Button.<br />
[[File:ExportSalespersonAndPaymentTypes.png]]<br />
* The Cash and Check payment types will probably already be in QuickBooks, so instead of exporting them you will need to synch them up with QuickBooks. To synch the payment types, double click on them and select the corresponding entry in the window that appears.<br />
[[File:SynchPaymentTypes.png]]<br />
* You can check on the sales representative list in QuickBooks by going to 'Lists >> Customer & Vendor Profile Lists >> Sales Rep List'. You can check the payment types in QuickBooks by going to 'Lists >> Customer & Vendor Profile Lists >> Payment Method List'.<br />
<br />
=== Configuring the Accounts ===<br />
* '''YOU WILL NEED TO CHECK WITH THE COMPANY ACCOUNTANT/BOOKKEEPER TO COMPLETE THIS SECTION'''<br />
* This is the internal accounting principles that the specific customer runs by, you can not assume that it will be the same for every yard, so be very careful here. Even so, here is a general idea of what you are looking for on the Config tab:<br />
** Part Type Income Account: Inside of QuickBooks, create a new Income Account called 'ITrack Sales' and make it a subaccount of the main Income Account. After 'ITrack Sales' is created then assign it to the Part Type Income Account in ITrack. <h6><font color='red'>[Needs more in-depth steps of how to do this]</font></h6><br />
** Part Type Expense Account: This is not really used, you can leave it blank.<br />
** Tax Type Vendor: The Vendor that tax types should be associated with. Probably the IRS or State Revenue Service, if the accountant does not want to use that, then you can create a vendor called 'Sales Tax' in QuickBooks and assign it to the Tax Type Vendor in ITrack. <h6><font color='red'>[Needs more in-depth steps of how to do this]</font></h6><br />
** Credit Memo Account: The bank that the company goes to.<br />
** Payment Account: Use the Accounts Receivable account. <h6><font color='red'>[Show where that is at in QuickBooks]</font></h6><br />
** Check Bank: The bank that the company goes to.<br />
** Check Account: Use the Accounts Receivable account like the Payment Account.<br />
** Invoice Other: Assign this to the Misc. Part Type that we pushed over earlier.<br />
** Invoice Account: Something related to 'Accounts Receivable'. <h6><font color='red'>[Needs better instructions]</font></h6><br />
<br />
{{Tip|Payments exported to QuickBooks get sent to the "Undeposited Funds" account, even if the account is renamed to something else.}}<br />
<br />
=== Synching up Tax Types ===<br />
* Now we can synch up our tax types with what is in QuickBooks.<br />
* Back on the "Other" tab in the QuickBooks Screen in ITrack you will notice that the tax types went from being gray to being a solid black color. Unfortunately, if you try to export them you will receive errors. Instead you will need to enter those tax types into QuickBooks (if they are not already there), then synch the tax types.<br />
[[File:ExportingTaxTypes.png]]<br />
* To add the tax items into QuickBooks, inside of QuickBooks go to 'Edit >> Preferences >> Sales Tax >> Company Preferences'.<br />
* Click the 'Add Sales Tax Item'<br />
** Type: Sales Tax Item<br />
** Sales Tax Name: (... the name of the tax, such as 'Sales Tax' or 'None')<br />
** Tax Rate (%): (The percentage of tax, such as '6.5%' or '0.0%')<br />
* You will need to do this for each tax item you want to synch between ITrack and QuickBooks. After all of the tax items have been entered, make sure that 'Your most common sales tax item' is set to 'Sales Tax' in the QuickBooks Company Preferences'.<br />
* Back in the 'Other' tab of the QuickBooks Screen in ITrack, double click on the tax item to synch it up with QuickBooks.<br />
<br />
=== Push Invoices & Payments ===<br />
* You should now be ready to push invoices from ITrack to QuickBooks. This can be done from the Invoices tab of the QuickBooks Screen in ITrack Pro. Make sure to hit the 'Payments' button to see available payments that can be exported.<br />
* After selecting the invoices and payments that you want to push over, click the 'Export' button.<br />
[[File:ExportInvoicesAndPayments.png]]<br />
* Inside of QuickBooks you can verify that the invoices and payments made it over by clicking on the 'Customer' button at the top toolbar inside of QuickBooks, then selecting the customer from the list. The invoices and payments should be in the results area. <br />
* The payments should be deposited funds. To check that go to Char to Accounts >> ITrack Sales >> Banking >> Make Deposit >> Undeposited Funds, and the payment amount should show in there.<br />
* Make sure you void out the invoice and payment you pushed over - both in ITrack and in QuickBooks.<br />
<br />
[[Category:Integrations]]</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Known_Ebay_Problems&diff=7038Known Ebay Problems2013-09-11T17:24:20Z<p>Spatras: /* Image Problems */</p>
<hr />
<div>==Ebay Listing Problems==<br />
This wiki is for fixes to common (but show stopping) problems with our ebay extnesion and TurboLister<br />
<br />
==TurboLister HTML Problems==<br />
===Not Displaying Correctly===<br />
*'''Cause'''<br />
Sometimes HTML won't display correctly if it has certain Javascript or CSS elements. <br />
<br />
*'''Resolution'''<br />
One fix for this is to make sure TurboLister is up to date and make sure that you are using Turbo Lister 2. If a Description is still not displaying correctly try taking the Description and putting it into an html document and opening it in your browser. <br />
<br />
*'''Similar Problems'''<br />
Problem is HTML or JavaScript related.<br />
<br />
===Template===<br />
*'''Cause'''<br />
Sometimes users will have additional templates in turbolister to help with things like return policy and shipping details but this can also cause problems with the price, auction format, title, and description being changed. <br />
<br />
*'''Resolution'''<br />
The fix is to delete or change the TurboLister template.<br />
<br />
*'''Similar Problems'''<br />
ITrack ebay Template is wrong or wrong ITrack ebay Template is being used<br />
<br />
==Image Problems==<br />
Before anything make sure all links look like: "http://www.cyclerecyclers.net/image.php?productcode={?ProductCode}&inventoryid={?PartNum}&imageid={X}" and X is replaced by a number that is greater than 0<br />
<br />
===Preview Image not Showing up===<br />
*'''Cause'''<br />
This means that they don't have images in their ITrack image directory which can be found under "imagesdir" in the Host.ini<br />
<br />
*'''Resolution'''<br />
Change the directory where ITrack looks for and saves images<br />
<br />
===No Images Show up===<br />
*'''Cause'''<br />
This usually means that images aren't sync'd so it assumes there are no pictures associated with the part trying to be listed on HTP/Recyclers/Cyclerecyclers<br />
<br />
*'''Resolution'''<br />
Re-sync their images and make sure Replikwando is working<br />
<br />
==Steps for Debugging TurboLister Problems==<br />
1. Check the CSV Created by ITrack before it is imported into TurboLister and make sure all values are correct and present<br />
<br />
2. Check to see if TurboLister is Throwing any Errors<br />
<br />
3. Check Listing in TurboLister to make sure all values are correct and present<br />
<br />
4. Make sure a TurboLister Template isn't interfering with Values sent from ITrack<br />
<br />
5. (If Description Related) Copy out description into an HTML document and open it in a Web Browser to see if it displays correctly<br />
<br />
6. Get TurboLister User File, Information, Settings, and Templates to test independently</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Known_Ebay_Problems&diff=7037Known Ebay Problems2013-09-10T23:57:19Z<p>Spatras: Created page with "==Ebay Listing Problems== This wiki is for fixes to common (but show stopping) problems with our ebay extnesion and TurboLister ==TurboLister HTML Problems== ===Not Displaying C..."</p>
<hr />
<div>==Ebay Listing Problems==<br />
This wiki is for fixes to common (but show stopping) problems with our ebay extnesion and TurboLister<br />
<br />
==TurboLister HTML Problems==<br />
===Not Displaying Correctly===<br />
*'''Cause'''<br />
Sometimes HTML won't display correctly if it has certain Javascript or CSS elements. <br />
<br />
*'''Resolution'''<br />
One fix for this is to make sure TurboLister is up to date and make sure that you are using Turbo Lister 2. If a Description is still not displaying correctly try taking the Description and putting it into an html document and opening it in your browser. <br />
<br />
*'''Similar Problems'''<br />
Problem is HTML or JavaScript related.<br />
<br />
===Template===<br />
*'''Cause'''<br />
Sometimes users will have additional templates in turbolister to help with things like return policy and shipping details but this can also cause problems with the price, auction format, title, and description being changed. <br />
<br />
*'''Resolution'''<br />
The fix is to delete or change the TurboLister template.<br />
<br />
*'''Similar Problems'''<br />
ITrack ebay Template is wrong or wrong ITrack ebay Template is being used<br />
<br />
==Image Problems==<br />
===Preview Image not Showing up===<br />
*'''Cause'''<br />
This means that they don't have images in their ITrack image directory which can be found under "imagesdir" in the Host.ini<br />
<br />
*'''Resolution'''<br />
Change the directory where ITrack looks for and saves images<br />
<br />
===No Images Show up===<br />
*'''Cause'''<br />
This usually means that images aren't sync'd so it assumes there are no pictures associated with the part trying to be listed on HTP/Recyclers/Cyclerecyclers<br />
<br />
*'''Resolution'''<br />
Re-sync their images and make sure Replikwando is working<br />
<br />
==Steps for Debugging TurboLister Problems==<br />
1. Check the CSV Created by ITrack before it is imported into TurboLister and make sure all values are correct and present<br />
<br />
2. Check to see if TurboLister is Throwing any Errors<br />
<br />
3. Check Listing in TurboLister to make sure all values are correct and present<br />
<br />
4. Make sure a TurboLister Template isn't interfering with Values sent from ITrack<br />
<br />
5. (If Description Related) Copy out description into an HTML document and open it in a Web Browser to see if it displays correctly<br />
<br />
6. Get TurboLister User File, Information, Settings, and Templates to test independently</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=7035Ebay templates2013-09-04T17:35:25Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Templates==<br />
Templates are used to fill in the various fields in Turbo Lister. These templates are part type specific (ex. one template for engines another for transmissions) but if a part type doesn't have a template assigned to it, the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags. The tags will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://www.cyclerecyclers.net/image.php?productcode={?ProductCode}&inventoryid={?PartNum}&imageid=X" (where x is the number which just represents the numeric ordinal of the image (if excluded 1 is assumed))<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
**NOTE: The image URL must be enclosed by HTML image tags. <img></img><br />
<br />
==Tags==<br />
===General Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?Make} || The part's make<br />
|-<br />
| {?Model} || The part's model<br />
|-<br />
| {?Year} || The part's year<br />
|-<br />
| {?Description} || The part's description<br />
|-<br />
| {?Price} || The part's price<br />
|-<br />
| {?Manufacturer} || The part's assembly manufacturer<br />
|-<br />
| {?AssemblyModel} || The part's assembly model<br />
|-<br />
| {?PartType} || The part's type<br />
|-<br />
| {?Category} || The part's eBay category<br />
|-<br />
| {?Store} || The part's store<br />
|-<br />
| {?ProductCode} || The a stores product code<br />
|-<br />
| {?TagNumber} || The part's tag number<br />
|-<br />
| {?Condition} || The part's Condition<br />
|-<br />
| {?FlexLabelX} || The part's flex label (X should be replaced by a number between 1 and 4)<br />
|-<br />
| {?FlexValueX} || The part's flex value (X should be replaced by a number between 1 and 4}<br />
|}<br />
<br />
===ITrack Pro Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?PartNum} || The part's specific part number<br />
|}<br />
===ITrack Enterprise Tags===<br />
{| class="wikitable"<br />
|-<br />
! Tag !! Tag gets replaced with<br />
|-<br />
| {?InventoryID} || The part's inventory id<br />
|-<br />
| {?PartNumber}|| The part's Vendor Part Number<br />
|}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6396Ebay templates2013-01-07T19:20:19Z<p>Spatras: /* Description Templates */</p>
<hr />
<div>==Templates==<br />
Templates are used to fill in the various fields in Turboister. These templates are be part type specific (ex. one template for engines another for transmissions) but if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://www.cyclerecyclers.net/image.php?productcode={?Productcode}&inventoryid={?PartNum}&imageid=X" (where x is the number which just represents the numeric ordinal of the image (if excluded 1 is assumed))<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Vendor Part Number</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6241Ebay templates2012-11-21T01:20:49Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://www.cyclerecyclers.net/image.php?productcode={?Productcode}&inventoryid={?PartNum}&imageid=X" (where x is the number which just represents the numeric ordinal of the image (if excluded 1 is assumed))<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Vendor Part Number</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6240Ebay templates2012-11-21T00:55:01Z<p>Spatras: /* ITrack Enterprise Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{imageId}.jpg" (where img id is a number usually starting at 1)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Vendor Part Number</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6239Ebay templates2012-11-20T23:45:37Z<p>Spatras: /* ITrack Enterprise Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{imageId}.jpg" (where img id is a number usually starting at 1)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6238Ebay templates2012-11-20T23:45:24Z<p>Spatras: /* Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{imageId}.jpg" (where img id is a number usually starting at 1)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6237Ebay templates2012-11-19T17:34:59Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{imageId}.jpg" (where img id is a number usually starting at 1)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6222Ebay templates2012-11-13T22:26:00Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{image Id}.jpg" (where img id is a number usually starting at 1 but sometimes not)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6221Ebay templates2012-11-13T22:25:40Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{img Id}.jpg" (where img id is a number usually starting at 1 but sometimes not)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6220Ebay templates2012-11-13T22:25:28Z<p>Spatras: /* Images in Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_{img Id>}.jpg" (where img id is a number usually starting at 1 but sometimes not)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6219Ebay templates2012-11-13T21:46:30Z<p>Spatras: </p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/{?InventoryID}_<img Id>.jpg" (where img id is a number usually starting at 1 but sometimes not)<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6214Ebay templates2012-11-07T00:34:14Z<p>Spatras: /* Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/&productcode={?ProductCode}&id={?InventoryID}"<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
#{?TagNumber} - replaced by the part's tag number<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6213Ebay templates2012-11-07T00:31:27Z<p>Spatras: /* ITrack Enterprise Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/&productcode={?ProductCode}&id={?InventoryID}"<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id<br />
#{?PartNumber} - replaced by the part's Part Number<br />
#{?Condition} - replaced by the part's Condition<br />
#{?TagNumber} - replaced by the part's tag number<br />
#{?FlexLabelX} - replaced by the part's flex label (X should be replaced by a number between 1 and 4)<br />
#{?FlexValueX} - replaced by the part's flex value (X should be replaced by a number between 1 and 4}</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6212Ebay templates2012-11-07T00:07:39Z<p>Spatras: /* General Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/&productcode={?ProductCode}&id={?InventoryID}"<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?Manufacturer} - gets replaced with Assembly Manufacturer<br />
#{?AssemblyModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6211Ebay templates2012-11-07T00:05:22Z<p>Spatras: /* General Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/&productcode={?ProductCode}&id={?InventoryID}"<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?ManMake} - gets replaced with Assembly Manufacturer<br />
#{?ManModel} - gets replaced with a part's Assembly model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id</div>Spatrashttps://wikido.isoftdata.com//index.php?title=ITrack/eBay_Screen&diff=6202ITrack/eBay Screen2012-11-06T20:03:26Z<p>Spatras: /* Listing Parts */</p>
<hr />
<div>==Initial Setup==<br />
===Linking eBay Account===<br />
# When you open the eBay screen for the first time, click the '''Update''' button.<br />
# A dialog will appear telling you to link your eBay account with ITrack, Click '''OK'''.<br />
# The ITrack Online screen will appear with the login screen for eBay. Enter your eBay username and password.<br />
# Once you're logged in, click the '''I Agree''' button to link your eBay account with ITrack. <br />
# Once you've authenticated with eBay, click the '''Update''' button on the '''eBay''' screen > '''Auctions''' tab.<br />
#* This will cause any auctions that have happened in the last 30 days to appear in ITrack.<br />
# Doubling clicking an auction will open the eBay listing for that auction.<br />
<br />
===Getting Turbo Lister or Blackthorne===<br />
The eBay screen in ITrack supports exporting to both Turbo Lister and [http://pages.ebay.com/blackthorne/pro.html Blockthorne].<br />
<br />
====Getting Turbo Lister====<br />
[[Image:Ebay turbo lister Download button.png|200px|thumb|Turbo Lister Download Button]]<br />
# If you have never used Turbo Lister to list parts on eBay, you will need to download and install Turbo Lister.<br />
# The eBay screen will display a '''Download''' button in the bottom right corner of the Parts listing tab if you don't yet have it installed.<br />
# When you click it, the download page for Turbo Lister will appear.<br />
# Click the '''Download Now!''' button.<br />
# A dialog will appear asking you Run or Save, click '''Run'''<br />
# Once the installer is downloaded, it will ask if you want to Run, accept.<br />
# The installer wizard will appear. Walk your way through the installer, the defaults should be good.<br />
# Once the installer is completed, click the '''Finish''' button.<br />
# Back in ITrack, you will now be able to export parts to Turbo Lister, see the '''Listing Parts''' section below.<br />
<br />
==Listing Parts==<br />
===Finding and Adding Parts===<br />
# Go to the '''Parts listing''' tab.<br />
# Click the '''Add''' button at the bottom.<br />
# This will take you to the [[ITrack/Pro/Search Screen|Search screen]].<br />
# Perform a search.<br />
# If you would like to add just one part from the search results to the eBay screen, simply double click that part.<br />
# If you would like to add multiple parts from the results, hold the '''Ctrl key''' and click all parts you would like to add. Then, press the '''eBay button''' at the bottom. This will allow you to post multiple items at once, however, at the moment you are only able to list a quantity of one for each item that you are uploading to eBay.<br />
# This will cause the eBay screen to appear with the the part(s) you selected.<br />
#*If you have templates configured it will also automatically populate the description field. For more information on templates see [http://wikido.isoftdata.com/index.php/Ebay_templates Ebay Templates]<br />
<br />
===Editing Parts===<br />
# To make changes to the Item before exporting to TurboLister, simply '''double click''' it or select it and press the '''Edit button''' at the bottom.<br />
# Use the fields shown to make any necessary changes and then '''click OK'''. Note: if the Buy it Now price is set to zero, then the Buy it Now option will be disabled for the item.<br />
# You can delete a part from the eBay screen by selecting it (or multiple by holding '''Ctrl''' and clicking the items) and pressing the '''Delete button''' at the bottom.<br />
<br />
===Exporting===<br />
[[Image:EBay export button.png|200px|thumb|Export Button]]<br />
# If the part has any images attached to it, ITrack will automatically add the images (up to 12 pictures) to the posting.<br />
# Once you've got your items ready for Export, click the '''Export button''' (bottom left) on the '''Parts listing''' tab. <br />
# A dropdown will appear and allow you choose TurboLister or BlackThorne. Choose the appropriate option.<br />
# A '''Save As''' dialog will appear asking you where you want to save the CSV. Choose a location you will remember(Desktop is easy to remember) and click the '''Save''' button.<br />
# Loading the parts into Turbo Lister or Blackthorne: <br />
#* In Turbo go to the '''File menu''' > '''Import items''' > '''From File...'''<br />
#* In Blackthone, go to the '''File menu''' > '''Import''' > '''Import From Flat File...'''<br />
#** Note that exporting a Turbo Lister csv and importing into Blackthorne using the '''Import Turbo Lister CSV File''' option will not work.<br />
# An open dialog will appear, select the CSV you saved in step 4 and click the '''Open''' button.<br />
# From here your items will be loaded into Turbo Lister/Blackthorne where you can make any final changes and list the parts on eBay.<br />
#* For more info on using Turbo Lister [http://reviews.ebay.com/How-to-Use-Turbo-Lister-A-Tutorial_W0QQugidZ10000000001244518 check this useful page].<br />
#* Before listing parts on eBay, be sure you understand the [http://pages.ebay.com/help/sell/fees.html fees associated with listing on eBay].<br />
<br />
==Viewing Auctions==<br />
# Auctions will appear on the '''Auctions''' tab.<br />
# To get the latest set of auction info, click the '''Update''' button.<br />
# This will get the latest auction info from eBay.<br />
# Double clicking a auction in the list will show the eBay listing for the item on the ITrack Online screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=ITrack/eBay_Screen&diff=6201ITrack/eBay Screen2012-11-06T20:02:07Z<p>Spatras: /* Finding and Adding Parts */</p>
<hr />
<div>==Initial Setup==<br />
===Linking eBay Account===<br />
# When you open the eBay screen for the first time, click the '''Update''' button.<br />
# A dialog will appear telling you to link your eBay account with ITrack, Click '''OK'''.<br />
# The ITrack Online screen will appear with the login screen for eBay. Enter your eBay username and password.<br />
# Once you're logged in, click the '''I Agree''' button to link your eBay account with ITrack. <br />
# Once you've authenticated with eBay, click the '''Update''' button on the '''eBay''' screen > '''Auctions''' tab.<br />
#* This will cause any auctions that have happened in the last 30 days to appear in ITrack.<br />
# Doubling clicking an auction will open the eBay listing for that auction.<br />
<br />
===Getting Turbo Lister or Blackthorne===<br />
The eBay screen in ITrack supports exporting to both Turbo Lister and [http://pages.ebay.com/blackthorne/pro.html Blockthorne].<br />
<br />
====Getting Turbo Lister====<br />
[[Image:Ebay turbo lister Download button.png|200px|thumb|Turbo Lister Download Button]]<br />
# If you have never used Turbo Lister to list parts on eBay, you will need to download and install Turbo Lister.<br />
# The eBay screen will display a '''Download''' button in the bottom right corner of the Parts listing tab if you don't yet have it installed.<br />
# When you click it, the download page for Turbo Lister will appear.<br />
# Click the '''Download Now!''' button.<br />
# A dialog will appear asking you Run or Save, click '''Run'''<br />
# Once the installer is downloaded, it will ask if you want to Run, accept.<br />
# The installer wizard will appear. Walk your way through the installer, the defaults should be good.<br />
# Once the installer is completed, click the '''Finish''' button.<br />
# Back in ITrack, you will now be able to export parts to Turbo Lister, see the '''Listing Parts''' section below.<br />
<br />
==Listing Parts==<br />
===Finding and Adding Parts===<br />
# Go to the '''Parts listing''' tab.<br />
# Click the '''Add''' button at the bottom.<br />
# This will take you to the [[ITrack/Pro/Search Screen|Search screen]].<br />
# Perform a search.<br />
# If you would like to add just one part from the search results to the eBay screen, simply double click that part.<br />
# If you would like to add multiple parts from the results, hold the '''Ctrl key''' and click all parts you would like to add. Then, press the '''eBay button''' at the bottom. This will allow you to post multiple items at once, however, at the moment you are only able to list a quantity of one for each item that you are uploading to eBay.<br />
# This will cause the eBay screen to appear with the the part(s) you selected.<br />
#*If you have templates configured it will also automatically populate the description field. For more information on templates see [http://wikido.isoftdata.com/index.php/Ebay_templates|Ebay Templates]<br />
<br />
===Editing Parts===<br />
# To make changes to the Item before exporting to TurboLister, simply '''double click''' it or select it and press the '''Edit button''' at the bottom.<br />
# Use the fields shown to make any necessary changes and then '''click OK'''. Note: if the Buy it Now price is set to zero, then the Buy it Now option will be disabled for the item.<br />
# You can delete a part from the eBay screen by selecting it (or multiple by holding '''Ctrl''' and clicking the items) and pressing the '''Delete button''' at the bottom.<br />
<br />
===Exporting===<br />
[[Image:EBay export button.png|200px|thumb|Export Button]]<br />
# If the part has any images attached to it, ITrack will automatically add the images (up to 12 pictures) to the posting.<br />
# Once you've got your items ready for Export, click the '''Export button''' (bottom left) on the '''Parts listing''' tab. <br />
# A dropdown will appear and allow you choose TurboLister or BlackThorne. Choose the appropriate option.<br />
# A '''Save As''' dialog will appear asking you where you want to save the CSV. Choose a location you will remember(Desktop is easy to remember) and click the '''Save''' button.<br />
# Loading the parts into Turbo Lister or Blackthorne: <br />
#* In Turbo go to the '''File menu''' > '''Import items''' > '''From File...'''<br />
#* In Blackthone, go to the '''File menu''' > '''Import''' > '''Import From Flat File...'''<br />
#** Note that exporting a Turbo Lister csv and importing into Blackthorne using the '''Import Turbo Lister CSV File''' option will not work.<br />
# An open dialog will appear, select the CSV you saved in step 4 and click the '''Open''' button.<br />
# From here your items will be loaded into Turbo Lister/Blackthorne where you can make any final changes and list the parts on eBay.<br />
#* For more info on using Turbo Lister [http://reviews.ebay.com/How-to-Use-Turbo-Lister-A-Tutorial_W0QQugidZ10000000001244518 check this useful page].<br />
#* Before listing parts on eBay, be sure you understand the [http://pages.ebay.com/help/sell/fees.html fees associated with listing on eBay].<br />
<br />
==Viewing Auctions==<br />
# Auctions will appear on the '''Auctions''' tab.<br />
# To get the latest set of auction info, click the '''Update''' button.<br />
# This will get the latest auction info from eBay.<br />
# Double clicking a auction in the list will show the eBay listing for the item on the ITrack Online screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6196Ebay templates2012-11-05T23:57:54Z<p>Spatras: /* Description Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
===Images in Templates===<br />
To put a parts picture into a template use the link "http://imagehost.isoftdata.com/phpThumb.php?src=partimages/{?ProductCode}/&productcode={?ProductCode}&id={?InventoryID}"<br />
*NOTE: if there are more image tags than there are images they will show up with an image not found image<br />
<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?ManMake} - gets replaced with manufacturer make<br />
#{?ManModel} - gets replaced with a part's manufacture model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6195Ebay templates2012-11-05T19:38:24Z<p>Spatras: /* General Tags */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?ManMake} - gets replaced with manufacturer make<br />
#{?ManModel} - gets replaced with a part's manufacture model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
#{?ProductCode} - gets replaced by a stores product code<br />
<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id</div>Spatrashttps://wikido.isoftdata.com//index.php?title=ITrack/eBay_Screen&diff=6188ITrack/eBay Screen2012-10-25T19:18:29Z<p>Spatras: /* Finding and Adding Parts */</p>
<hr />
<div>==Initial Setup==<br />
===Linking eBay Account===<br />
# When you open the eBay screen for the first time, click the '''Update''' button.<br />
# A dialog will appear telling you to link your eBay account with ITrack, Click '''OK'''.<br />
# The ITrack Online screen will appear with the login screen for eBay. Enter your eBay username and password.<br />
# Once you're logged in, click the '''I Agree''' button to link your eBay account with ITrack. <br />
# Once you've authenticated with eBay, click the '''Update''' button on the '''eBay''' screen > '''Auctions''' tab.<br />
#* This will cause any auctions that have happened in the last 30 days to appear in ITrack.<br />
# Doubling clicking an auction will open the eBay listing for that auction.<br />
<br />
===Getting Turbo Lister or Blackthorne===<br />
The eBay screen in ITrack supports exporting to both Turbo Lister and [http://pages.ebay.com/blackthorne/pro.html Blockthorne].<br />
<br />
====Getting Turbo Lister====<br />
[[Image:Ebay turbo lister Download button.png|200px|thumb|Turbo Lister Download Button]]<br />
# If you have never used Turbo Lister to list parts on eBay, you will need to download and install Turbo Lister.<br />
# The eBay screen will display a '''Download''' button in the bottom right corner of the Parts listing tab if you don't yet have it installed.<br />
# When you click it, the download page for Turbo Lister will appear.<br />
# Click the '''Download Now!''' button.<br />
# A dialog will appear asking you Run or Save, click '''Run'''<br />
# Once the installer is downloaded, it will ask if you want to Run, accept.<br />
# The installer wizard will appear. Walk your way through the installer, the defaults should be good.<br />
# Once the installer is completed, click the '''Finish''' button.<br />
# Back in ITrack, you will now be able to export parts to Turbo Lister, see the '''Listing Parts''' section below.<br />
<br />
==Listing Parts==<br />
===Finding and Adding Parts===<br />
# Go to the '''Parts listing''' tab.<br />
# Click the '''Add''' button at the bottom.<br />
# This will take you to the [[ITrack/Pro/Search Screen|Search screen]].<br />
# Perform a search.<br />
# If you would like to add just one part from the search results to the eBay screen, simply double click that part.<br />
# If you would like to add multiple parts from the results, hold the '''Ctrl key''' and click all parts you would like to add. Then, press the '''eBay button''' at the bottom. This will allow you to post multiple items at once, however, at the moment you are only able to list a quantity of one for each item that you are uploading to eBay.<br />
# This will cause the eBay screen to appear with the the part(s) you selected.<br />
#*If you have templates configured it will also automatically populate the description field. For more information on templates see [http://wikido.isoftdata.com/index.php/Ebay_templates| Ebay Templates]<br />
<br />
===Editing Parts===<br />
# To make changes to the Item before exporting to TurboLister, simply '''double click''' it or select it and press the '''Edit button''' at the bottom.<br />
# Use the fields shown to make any necessary changes and then '''click OK'''. Note: if the Buy it Now price is set to zero, then the Buy it Now option will be disabled for the item.<br />
# You can delete a part from the eBay screen by selecting it (or multiple by holding '''Ctrl''' and clicking the items) and pressing the '''Delete button''' at the bottom.<br />
<br />
===Exporting===<br />
[[Image:EBay export button.png|200px|thumb|Export Button]]<br />
# If the part has any images attached to it, ITrack will automatically add the images (up to 12 pictures) to the posting.<br />
# Once you've got your items ready for Export, click the '''Export button''' (bottom left) on the '''Parts listing''' tab. <br />
# A dropdown will appear and allow you choose TurboLister or BlackThorne. Choose the appropriate option.<br />
# A '''Save As''' dialog will appear asking you where you want to save the CSV. Choose a location you will remember(Desktop is easy to remember) and click the '''Save''' button.<br />
# Loading the parts into Turbo Lister or Blackthorne: <br />
#* In Turbo go to the '''File menu''' > '''Import items''' > '''From File...'''<br />
#* In Blackthone, go to the '''File menu''' > '''Import''' > '''Import From Flat File...'''<br />
#** Note that exporting a Turbo Lister csv and importing into Blackthorne using the '''Import Turbo Lister CSV File''' option will not work.<br />
# An open dialog will appear, select the CSV you saved in step 4 and click the '''Open''' button.<br />
# From here your items will be loaded into Turbo Lister/Blackthorne where you can make any final changes and list the parts on eBay.<br />
#* For more info on using Turbo Lister [http://reviews.ebay.com/How-to-Use-Turbo-Lister-A-Tutorial_W0QQugidZ10000000001244518 check this useful page].<br />
#* Before listing parts on eBay, be sure you understand the [http://pages.ebay.com/help/sell/fees.html fees associated with listing on eBay].<br />
<br />
==Viewing Auctions==<br />
# Auctions will appear on the '''Auctions''' tab.<br />
# To get the latest set of auction info, click the '''Update''' button.<br />
# This will get the latest auction info from eBay.<br />
# Double clicking a auction in the list will show the eBay listing for the item on the ITrack Online screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6187Ebay templates2012-10-25T19:16:48Z<p>Spatras: /* Description Templates */</p>
<hr />
<div>==Description Templates==<br />
Description Templates are used to fill in the description field in Turboister. These templates can be part type specific (ex. one template for engines another for transmissions) and if a part type doesn't have a template assigned to it the default template will be used instead. These templates support html and will keep your html whole on export. <br />
===Creating Templates===<br />
To create a template simply get one of your normal description fields and fill it out with tags that will be replaced with part specific data when you add it to the listings page.<br />
==Tags==<br />
===General Tags===<br />
#{?Make} - gets replaced with a part's make<br />
#{?Model} - gets replaced with a part's model<br />
#{?Year} - gets replaced with a part's year<br />
#{?Description} - gets replaced with a part's description<br />
#{?Price} - gets replaced with a part's price<br />
#{?ManMake} - gets replaced with manufacturer make<br />
#{?ManModel} - gets replaced with a part's manufacture model<br />
#{?PartType} - gets replaced with a part's type<br />
#{?Category} - gets replaced by the part's ebay catagory<br />
#{?Store} - gets replaced by a part's store<br />
===ITrack Pro Tags===<br />
#{?PartNum} - gets replaced by the part's specific part number<br />
===ITrack Enterprise Tags===<br />
#{?InventoryID} - gets replaced by the part's inventory id</div>Spatrashttps://wikido.isoftdata.com//index.php?title=ITrack/eBay_Screen&diff=6184ITrack/eBay Screen2012-10-25T18:27:36Z<p>Spatras: /* Listing Parts */</p>
<hr />
<div>==Initial Setup==<br />
===Linking eBay Account===<br />
# When you open the eBay screen for the first time, click the '''Update''' button.<br />
# A dialog will appear telling you to link your eBay account with ITrack, Click '''OK'''.<br />
# The ITrack Online screen will appear with the login screen for eBay. Enter your eBay username and password.<br />
# Once you're logged in, click the '''I Agree''' button to link your eBay account with ITrack. <br />
# Once you've authenticated with eBay, click the '''Update''' button on the '''eBay''' screen > '''Auctions''' tab.<br />
#* This will cause any auctions that have happened in the last 30 days to appear in ITrack.<br />
# Doubling clicking an auction will open the eBay listing for that auction.<br />
<br />
===Getting Turbo Lister or Blackthorne===<br />
The eBay screen in ITrack supports exporting to both Turbo Lister and [http://pages.ebay.com/blackthorne/pro.html Blockthorne].<br />
<br />
====Getting Turbo Lister====<br />
[[Image:Ebay turbo lister Download button.png|200px|thumb|Turbo Lister Download Button]]<br />
# If you have never used Turbo Lister to list parts on eBay, you will need to download and install Turbo Lister.<br />
# The eBay screen will display a '''Download''' button in the bottom right corner of the Parts listing tab if you don't yet have it installed.<br />
# When you click it, the download page for Turbo Lister will appear.<br />
# Click the '''Download Now!''' button.<br />
# A dialog will appear asking you Run or Save, click '''Run'''<br />
# Once the installer is downloaded, it will ask if you want to Run, accept.<br />
# The installer wizard will appear. Walk your way through the installer, the defaults should be good.<br />
# Once the installer is completed, click the '''Finish''' button.<br />
# Back in ITrack, you will now be able to export parts to Turbo Lister, see the '''Listing Parts''' section below.<br />
<br />
==Listing Parts==<br />
===Finding and Adding Parts===<br />
# Go to the '''Parts listing''' tab.<br />
# Click the '''Add''' button at the bottom.<br />
# This will take you to the [[ITrack/Pro/Search Screen|Search screen]].<br />
# Perform a search.<br />
# If you would like to add just one part from the search results to the eBay screen, simply double click that part.<br />
# If you would like to add multiple parts from the results, hold the '''Ctrl key''' and click all parts you would like to add. Then, press the '''eBay button''' at the bottom. This will allow you to post multiple items at once, however, at the moment you are only able to list a quantity of one for each item that you are uploading to eBay.<br />
# This will cause the eBay screen to appear with the the part(s) you selected.<br />
#*If you have templates set it will also automatically populate the templates. For more information on templates see [http://wikido.isoftdata.com/index.php/Ebay_templates| Ebay Templates]<br />
<br />
===Editing Parts===<br />
# To make changes to the Item before exporting to TurboLister, simply '''double click''' it or select it and press the '''Edit button''' at the bottom.<br />
# Use the fields shown to make any necessary changes and then '''click OK'''. Note: if the Buy it Now price is set to zero, then the Buy it Now option will be disabled for the item.<br />
# You can delete a part from the eBay screen by selecting it (or multiple by holding '''Ctrl''' and clicking the items) and pressing the '''Delete button''' at the bottom.<br />
<br />
===Exporting===<br />
[[Image:EBay export button.png|200px|thumb|Export Button]]<br />
# If the part has any images attached to it, ITrack will automatically add the images (up to 12 pictures) to the posting.<br />
# Once you've got your items ready for Export, click the '''Export button''' (bottom left) on the '''Parts listing''' tab. <br />
# A dropdown will appear and allow you choose TurboLister or BlackThorne. Choose the appropriate option.<br />
# A '''Save As''' dialog will appear asking you where you want to save the CSV. Choose a location you will remember(Desktop is easy to remember) and click the '''Save''' button.<br />
# Loading the parts into Turbo Lister or Blackthorne: <br />
#* In Turbo go to the '''File menu''' > '''Import items''' > '''From File...'''<br />
#* In Blackthone, go to the '''File menu''' > '''Import''' > '''Import From Flat File...'''<br />
#** Note that exporting a Turbo Lister csv and importing into Blackthorne using the '''Import Turbo Lister CSV File''' option will not work.<br />
# An open dialog will appear, select the CSV you saved in step 4 and click the '''Open''' button.<br />
# From here your items will be loaded into Turbo Lister/Blackthorne where you can make any final changes and list the parts on eBay.<br />
#* For more info on using Turbo Lister [http://reviews.ebay.com/How-to-Use-Turbo-Lister-A-Tutorial_W0QQugidZ10000000001244518 check this useful page].<br />
#* Before listing parts on eBay, be sure you understand the [http://pages.ebay.com/help/sell/fees.html fees associated with listing on eBay].<br />
<br />
==Viewing Auctions==<br />
# Auctions will appear on the '''Auctions''' tab.<br />
# To get the latest set of auction info, click the '''Update''' button.<br />
# This will get the latest auction info from eBay.<br />
# Double clicking a auction in the list will show the eBay listing for the item on the ITrack Online screen.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Ebay_templates&diff=6183Ebay templates2012-10-25T18:23:03Z<p>Spatras: Created page with "===Description Templates==="</p>
<hr />
<div>===Description Templates===</div>Spatrashttps://wikido.isoftdata.com//index.php?title=User:Spatras&diff=5795User:Spatras2012-05-08T22:55:52Z<p>Spatras: </p>
<hr />
<div>== Isoft History ==<br />
Steven was hired in the spring of 2012. Currently he is working on Itrack Pro and trying to learn the basics<br />
<br />
== Experience ==<br />
Steven is currently a sophomore in college working on his Computer Engineering degree at UNL.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Steven_Patras&diff=5794Steven Patras2012-05-08T22:55:23Z<p>Spatras: Redirected page to User:Spatras</p>
<hr />
<div>#REDIRECT [[User:Spatras]]</div>Spatrashttps://wikido.isoftdata.com//index.php?title=User:Spatras&diff=5793User:Spatras2012-05-08T22:52:58Z<p>Spatras: Created page with " == Isoft History == Steven was hired in the spring of 2012. Currently he is working on Itrack Pro and trying to learn the basics == Experience == Steven is currently a sophomo..."</p>
<hr />
<div><br />
== Isoft History ==<br />
Steven was hired in the spring of 2012. Currently he is working on Itrack Pro and trying to learn the basics<br />
<br />
<br />
== Experience ==<br />
Steven is currently a sophomore in college working on his Computer Engineering degree at UNL.</div>Spatrashttps://wikido.isoftdata.com//index.php?title=Category:ISoft_Employees&diff=5792Category:ISoft Employees2012-05-08T22:40:49Z<p>Spatras: /* Developers */</p>
<hr />
<div>Want to talk to one of these people? You can totally [[ISoft Data Systems#Phone_Numbers|call us]]!<br />
<br />
Are you one of these people? You should probably read up on the [[things ISoft employees should know]]!<br />
<br />
==Administration==<br />
* [[Matthew Wegener]]<br />
* [[Emily Lowell]]<br />
<br />
==Art and Advertising==<br />
* [[Amos Sterns]]<br />
<br />
==Developers==<br />
===Web===<br />
* [[Andrew Johnson]]<br />
* [[Brian Roy]]<br />
<br />
===Software===<br />
* [[Dillon Sadofsky]]<br />
* [[Josh Duff]]<br />
* [[Justin McKinstry]]<br />
* [[Steven Patras]]<br />
<br />
==Implementation==<br />
* [[Tony Merritt]]<br />
* [[Mark Hardisty]]<br />
<br />
==Sales==<br />
* [[Brendan Evans]]<br />
<br />
==Support==<br />
* [[Cody Hanson]]<br />
* [[Dayton Lowell]]<br />
* [[Justin Wheeler]]</div>Spatras