TSC tag printers

1. Download the latest TSC Tag Printer Driver from here.
2. Run through the installer
3. Once the printer is created, open up the properties of the printer
   1. On the General tab, click Printing Preferences...
   2. On the Page Setup tab click the Edit... button
   3. Change the Label Size: Width to 4.00 and Height to 5.50
   4. Click OK
   5. Select the radio next to Portrait 180°
   6. Click the Stock tab
   7. Select Labels With Marks from the Type: drop down
   8. Change Gap Height (or Mark Height): to 0.25in
   9. Click OK
   10. In the Tag Printer properties dialog, click the Advanced tab
   11. Click the Printing Defaults... button
   12. Repeat steps 3.2 through 3.9
4. In ITrack, go to Edit > Options
5. On the Printers tab, select Tag from the Printer Type dropdown
6. Select the Tag printer that was just setup, from the Printer Name dropdown
7. Open a part on the Part screen and print a tag
8. Confirm that everything is fine and dandy