Difference between revisions of "Zebra DS2278 Scanner"

From ISoft Wiki
Jump to: navigation, search
 
Line 14: Line 14:
  
 
===iOS using ITrack LX App===
 
===iOS using ITrack LX App===
'''You do not need to set up this device as a keyboard wedge'''
+
'''Tip: You do not need to set up this device as a keyboard wedge'''
  
 
1. You first need to install the Zebra iOS app https://apps.apple.com/us/app/zebra-scanner-control/id1034012069
 
1. You first need to install the Zebra iOS app https://apps.apple.com/us/app/zebra-scanner-control/id1034012069

Latest revision as of 11:03, 26 October 2020

This page will cover how to setup a Zebra DS2278 Bluetooth Barcode Scanner to work with iSoft products on mobile devices.

Scanner Info

  • Approx Cost: $190-$280 depending on accessories and support
  • Important Features: Bluetooth, 14 hour+ battery life, 5ft drop, 36 month warranty, 123Scan app, SDKs for iOS, Android, Windows

Quick Start Guide

Android using Chrome

  • The fastest way to get started is to scan the appropriate barcode for your device type. **Make sure your device is fully charged!
  • This model of scanner can scan from a high resolution monitor or screen
  • Each of the barcodes below will change the defaults on your scanner. You will need to "forget" or "remove" the device in your Bluetooth settings and reconnect
  • The below barcodes have the following settings: Prefix : Suffix $, HID features for iOS, Host: HID BT Classic

AndroidBarcode.JPG

iOS using ITrack LX App

Tip: You do not need to set up this device as a keyboard wedge

1. You first need to install the Zebra iOS app https://apps.apple.com/us/app/zebra-scanner-control/id1034012069

2. Open that app and go to Connection Help > Pair DS2278

Zebra-DS2278-setup-barcodes.PNG

3. Follow the onscreen instructions

4. Go back to the main screen and choose Connect

5. Tap on the DS2278 and choose Disconnect(this will disconnect it from the Zebra app so we can connect it to the ITrack LX app)

Zebra-DS2278-disconnect-screen.PNG

6. Go to the ITrack LX app and after a few seconds you should hear a connection beep from the scanner. Scanning in the ITrack LX app with the DS2278 should now work.

Charging the Scanner

  • The charging circuit on the scanner is capable of using as much current as possible based on the power source
  • Preferred Method: use a BC1.2 Compliant Micro USB adapter to a wall outlet (higher current charging capability above 900 mA)

Zebra battery.JPG

123Scan Software

Explanation of Settings

External Links

  • Zebra Support Page link
  • 123Scan Software Download link
  • Full Manual Download link